Technologies

	Research & Development Construction/Engineering: New Technologies start in this department, are tested and developed further. By 3D Construction, Mold Flow Studies and Finit-Elements-calculation capacity and stability are examined and controlled.

	Design The design should visualize the spirit of a binding model. For example, to design the new SL 70 toe our design-team was inspired by a cat!

	Measurement A key component of quality assurance includes a complete examination: initial samples, product series and all supplied parts.

	Tool Making Department This Department is high-tech as well. TYROLIA produces all tools and parts itself, except screws, bolts and springs. Due to this, TYROLIA is able to react fast to changing market conditions. 3D digitalization of design samples is the basis for construction. And with 3D construction injection molding tools, die cutting and multistage operation die tools are produced. The fine-finish tools are accurate to a hundredth of a millimeter. All the tools are assembled and tested by hand. Thus, every employee has contributed to the final product.

	Injection Molding Several parts of the binding are made by injection molding method. Synthetic granulate is melted and injected into the tool. Sprues are recycled, melted and again injected into the tool and thus supplied to the production process the TYROLIA recycling mill.

	Electroplating All steel parts are made corrosion resistant in the electroplating machine.

	Powder Coating TYROLIA has developed a method for powder coating to make non-conductive material on the surface conduct. abandonment of re-solvent through powder coating higher resistance

	Tampoprint By using the tampoprint process, three-dimensional surfaces are printed in our own printing office.

	Mounting The brake-mounting machine makes 14 work Steps - the end product is a mounted and tested product. TYROLIA views the ski-binding product as a controlling and load-bearing element between the ski boot and the ski. Besides automatization manual labour is a key factor for quality and precision.

	Quality assurance No binding that has not been calibrated and measured can leave the factory.