Nový

Compatibility

*There are older ski bindings/ski boots without marking. Here the technician needs to check boot compatibility according to the corresponding tech manual.
**The screwdriver icon indicates that the toe height needs to be adjusted by the technician. Although there is no Type A and C standard in ISO 9523, MN bindings are marked with A to avoid possibly installing a Type C Alpine or Walk boot in those bindings.
***The boot needs to have tech inserts. Compatibility with tech bindings might be limited. Check the recommendations of the binding and boot manufacturer.
****Compatibility with tech bindings might be limited. Check the recommendations of the binding and boot manufacturer.

Explanation

GW CA|#start|GW CA|#end|

GW CA

Compatible with all Alpine (ISO 5355 Type A and C) and Walk ski boots (ISO 23223 Type A and C). No boot sole height adjustment is needed - just step in and go. Convenient and reliable for a wide range of skiers.

GW|#start|GW|#end|

GW

Compatible with adult Alpine (ISO 5355 Type A) and adult Walk boots (ISO 23223 Type A). No further adjustment needed - except for ATTACK models, where you need to check and set the correct boot sole height to ensure optimal performance and safety.

Multinorm Standard (MN)|#start|Multinorm Standard (MN)|#end|

Multinorm Standard (MN)

Bindings marked „MN” are compatible with Alpine (ISO 5355 Type A), GripWalk/Adult Walk (ISO 23223 Type A), and Touring boots (ISO 9523). The AFD (Anti-Friction Device) height must be adjusted to match the boot sole height, and should be verified using a boot height tester for optimal performance and safety.

PIN Technology (PIN)|#start|PIN Technology (PIN)|#end|

PIN Technology (PIN)

These bindings require ski boots with tech (PIN) inserts for use in touring mode. They are compatible with Adult Walk ski boots (ISO 23223 Type A), Touring ski boots (ISO 9523), and some non-standard soles with tech inserts. Always check compatibility with both the binding and boot manufacturers to ensure proper fit and safe performance.

MN/PT|#start|MN/PT|#end|

MN/PT

In alpine mode, ATTACK HYBRID bindings work with Alpine, Touring, and GripWalk boots that meet the relevant standards. In touring mode, ski boots must have tech (PIN) inserts. This versatility makes them ideal for skiers who switch between resort-based and backcountry adventures.

Showing 1-3 of 7

Where is the marking on the binding?

Multi Norm bindings|#start|Multi Norm bindings|#end|

Multi Norm bindings

Multi Norm bindings have the ”MN” logo on the AFD:

Junior bindings|#start|Junior bindings|#end|

Junior bindings

Junior bindings have the ”CA” indication in the product's name and the GW logo on the toe:

Showing 1-2 of 4